WhatsApp Link

The use of plastic waste is an effort to reduce waste as minimum as possible. And within certain limits it saves resources and reduces dependence on imported raw materials. Four types of plastic waste that are popular and sell well are polyethylene (PE), High Density Polyethylene (HDPE), polypropylene (PP), and Asoi.

The use of plastic waste can be done by reuse or recycle. The use of plastic waste by recycling is generally done by industry. In general, there are 4 (four) requirements for the recycling industry, including plastic waste which must be in a certain form as needed (seeds, pellets, powders, fractions), waste must be homogeneous, cleaned with a washing machine, high RPM so that it is not contaminated, and not oxidized. To overcome this problem, before being used plastic waste is processed through the stages of separation based on type, cutting, washing in Rotary machines for removal of substances such as iron (FeO).

Plastic waste counter machine or MPLP 200 plastic mill, Capacity: 100 kg / hour, Dimensions: 100 x 100 x 150cm, Knife: 6 pieces of road knife @ 20cm, 4 pieces of silent knife @ 45cm, 1 piece of fly wheel (flywheel) , 12mm hole sieve, 10mm blade thickness, steel blade material and frame material (Mild Steel / MS) 5mm thick.

Drive engine uses Yanmar diesel engine Model: TF 85 MLYS Motor Model: Diesel Motor 4 Horizontal water-cooled step, Continuous output power: 7.5 Hp / 2200 rpm, Maximum power: 8.5 Hp / 2200 rpm, Combustion: Direct injection, Air suction: natural , Number of cylinders: 1, Diameter x step length: 85 x 87 mm, Volume steps: 493 cc, Direction of rotation: counterclockwise (viewed from the side of the style wheel), Governor System: OK, Cooling System: Radiator, Lubrication System forced with trochoidal pump, ignition system: Manual (crank), type of fuel: Solar with good quality, fuel tank capacity: 10.5 liters, lubricating oil: 2.2 liters, cooling water capacity: 1.65 liters, air cleaning system: element air filter dry (*)